NEW! Revolutionary Aluex 15T lifting beam

Aluex 15T is a new revolutionary lifting beam, first model on the market with interchangeable arms!
Arms of the beam are made in aluminum, and the middle part is made in steel. This provides higher security and safer lifting.
Arms of the lifting beam is bolted into the middle and are interchangeable, this gives you possibilities to change the arms if necessary.
New Aluex 15T is more safe than ever before, 3:1 safety factor. New design makes the beam more user friendly.
WLL 15T With >30° Lifting angle
WLL 10T With >45° Lifting angle

For more information about spare part, please ask us!

Lifting capacity Lenght Weight Material Max. width
15000kg 3,81m 91kg Aluminum/steel m

NEW! Aluex 50T takes lifting to next level

This unique spreader beam is meant for heavier lifts.
Still very manageable and easy to maneuver
with your hands.
Probably the fastest beam to use on the market in its size.

Lifting capacity Lenght Weight Material Max. width
50000kg 8m 1250kg Steel m

State of the art lifting beam

Aluex is a state of the art lifting beam with endless opportunities. Lift boats, construction equipment and a lot more, both big and small pieces. The lifting beam may be set to three different length prefrences and you don’t need to worry about width, aluex sets that for you.

Our flagship lifting beam with a 10t lifting capacity and a weight of only 46kg has all features you would want a lifting beam to have. The Aluex is anything but heavy, forget everything that feels slow, heavy or hard to handle. Unloading and set up of the Aluex is faster than any other lifting beam on the market. While safety is most important, you still need to be fast. Our lifting beam is CE approved and made with standard components used in the lifting industry, this also makes it easy to find spare parts.

kuvat-picturefactory-aluexbeams-lifting-beam--2-nostopalkki
Lifting capacity Lenght Weight Material Max. width
10000kg 2,5m 45kg Aluminium 3,5m

The widest span lifting spreader

Aluex is a state of the art lifting beam with endless opportunities. Lift boats, construction equipment and a lot more, both big and small pieces. The lifting beam may be set to three different length preferences and you don’t need to worry about width, aluex sets that for you.

This is the wide span version of our flagship lifting spreader that has a width of 420 cm when fully extended. The Aluex is anything but heavy, forget everything that feels slow and cumbersome to use. Unloading and set up of the Aluex is faster than any other lifting spreader on the market.

kuvat-picturefactory-aluexbeams-lifting-beam--2-nostopalkki
Lifting capacity Lenght Weight Material Max. width
10000kg 2,5m 65kg Aluminium 4,2m

The flagships little brother

The even more lightweight version of our state of the art lifting beam. Aluex 5 only weighs 35kg, and has a lifting capacity of 5000kg. Unloading and set up of the smaller Aluex is faster than any other lifting beam on the market as it is done by hand!

Enjoy every moment of your job with the aluex 5.

Lifting capacity Lenght Weight Material Max. width
5000kg 3,5m 35kg Aluminium 3,5m

 

Sick of unwieldy lifting gear?

 

GET YOUR QUOTE NOW!

 

Spreader bars versus lifting beams and frames

Have You been wondering what the difference between lifting beams and spreader bars is?

It’s not always clear how to distinguish the one from the other. Different lifting devices can often do the same job, which adds to the misconception that the terms are interchangeable.

Frankly, we have not been completely sure of what term to use for our products either.

Simply put, both lifting beams and spreader bars adds the possibility to use multiple attachment points to lifting equipment that would otherwise only provide a single point. This is of great use when lifting large or long objects as it adds stability to the lift, and they allow You to lift objects that othervise could not be lifted from a single point.

So what is the difference?

A lifting beam or spreader beam is commonly a stout I-beam with one central attachment point on the top and two or more attachment points on the bottom. Because of its design, it must be structurally very sturdy to handle the stresses involved and lifting beams are therefore generally very heavy.

A spreader bar is a bar with attachment points at both ends. By design it does not do any real lifting itself as it just spreads out the legs of the lifting slings, therefore spreader bars can be made to be lightweight. The top rigging also gives You stability in the lift.

Lifting frames or spreader frames are multiple point lifting devices with more than two attachment points. They are generally very heavy. Being able to use multiple attachment points may however sometimes be a necessity when lifting complex or delicate objects.

Well, what do we have to bring to the table? For one, experience. Being in the buisness for a long time as a company providing lifting services, we know what we like when we see it. And the fact is, we have never before seen a product like ours.

We just had to make it ourselves.

The versatility and light weight of the spreader bar combined with the adaptability of an adjustable lifting frame is what makes our design so successful.

The light weight makes use and transportation easy to handle by one man. The telescopic design makes it versatile when in use and allows You to easily store it when not in use.

 

Fill out this form to ask a quote from us:


Please leave this field empty.


lightweight lifting frame spreader bar